View source

= GECK =

==Timed Doors==
Script Type:Object

<small>To be placed on an [[activator]], Uses Persistent References to design Objects.</small>

<pre>
ScriptName VaultpTimedDoor ;By BEArbiter

;Explaination:
;This script is to make TimedDoors, Elevators,...
;Once you press the button, Isactivated is set to 1, so pressing the button againt won't do anything, it need to be Reset to 0
;
;Then, each 1 second, One or more Door will be
;opened/closed. When All the door have been activated, the script
;will reset the Activator.
;It use Persitent Reference of the doors, So You need one
;Script per Activator/Elevator,....
;
;A Timing Issue Is possible(if you place Two or more activator
;and activate both at little interval), It can be
;Solve by Create An Global Variable instead of Isactivated
;Then, all the button witch use a copy of this
;script won't be useable while a Door is opened


float timer
;For a Global Variable, Go to Global, create a
;new short var named isactivated and delete theses line:
int isactivated
:<end of delete action>

Begin Onactivate
;If the button have been pressed before and
;not been reseted, the activator won't do anything
    if isactivated == 0
   	set isactivated to 1
   	Activate
    else
        ;If you want the Activation to do something
    endif
end

begin gamemode
   If isactivated == 1
      if timer < 8

         if timer < 1;
         elseif Timer < 2;After One second, do the following
	    if Door1.GetOpenState == 3
               Door1.SetOpenState 1
               ;Door3.SetOpenState 1
               ;You can Activate more than one door at a time.
            elseif Door1.GetOpenState == 1
               Door1.SetOpenState 0
               ;Door3.SetOpenState 0
            Endif
         Elseif Timer < 3
            If Door2.GetOpenState == 3
               Door2.SetOpenState 1
            Elseif Door2.GetOpenState == 1
               Door2.SetOpenState 0
            Endif
         Elseif Timer < 4
            If Door3.GetOpenState == 3
               Door3.SetOpenState 1
            Elseif Door3.GetOpenState == 1
               Door3.SetOpenState 0
            Endif
        Endif

     Else
        Set isactivated to 0
        Set timer to 0
     Endif
   Endif
End

</pre>


==Light switch==
Script Type:Object

<small>To be placed on an [[activator]], and [[Reference#Linked_Ref|linked]] to a light source or x-marker [[Reference#Enable_Parent|Enable Parent]].</small>

<pre>
ScriptName LightSwitchScript

ref light

Begin OnActivate
	if light == 0
		set light to GetLinkedRef
	endif

	if light.GetDisabled
		light.Enable
	else
		light.Disable
	endif
	Activate
End
</pre>

==Ground area mark that follows the crosshair==
You can see the effect of this script in this [http://www.youtube.com/watch?v=Utc5SvInb3c video]
Script Type: Quest or Effect
<small>For a Quest script, use a [[GameMode]] block.  For an Effect script, use a [[ScriptEffectUpdate]] block.<br>Instead of activator put the name of the activator or actor you want to use, in order to use the EditorRefID of your reference in a script like this, it must be a persistent reference.</small>

<pre>
float xang
float zang
float x
float y
float z
float playerheight
float lont

begin gamemode

	set xang to player.getangle x
	set zang to player.getangle z * -1 + 90

	if xang <= 5
		set lont to 1300;  you can change this value if you need to
	else
		if player.issneaking == 0
			set playerheight to 322
		else
			set playerheight to 252
		endif
		set lont to (playerheight*cos xang/sin xang * 0.34118010537042257764)
	endif

	set xang to player.getangle x * -1

	set x to lont * cos xang * cos zang
	set y to lont * cos xang * sin zang

	Activator.moveto player x y 0

end
</pre>


==Forced Relative Orientation==
Script Type: Quest, Object or Effect
<small>For a Quest or Object script, use a [[GameMode]] block.  For an Effect script, use a [[ScriptEffectUpdate]] block.<br />In order to use the EditorRefID of your reference in a script like this, it must be a persistent reference.</small>

<pre>float fAngle
float fRelativePos

Begin GameMode

	set fRelativePos to player.GetPos z + <Z OFFSET>
	myREF.setPos z fRelativePos

	set fAngle to player.GetAngle Z + <ANGLE OFFSET>
	myREF.SetAngle Z fAngle

	set fRelativePos to player.GetPos Y + <PLAYER OFFSET> * cos fAngle
	myREF.SetPos Y fRelativePos

	set fRelativePos to player.GetPos X + <PLAYER OFFSET> * sin fAngle
	myREF.SetPos X fRelativePos

End
</pre>

<ul>
	<li><Z OFFSET> determines the reference's z offset from the player's feet.  The higher this is, the further above the player's feet the reference will appear.  If <Z OFFSET> should be determined by where the player is looking, this should be used:<pre>set fAngle to player.GetAngle X
set fRelativePos to player.GetPos Z - <PLAYER OFFSET> * sin fAngle
</pre>
	</li>
	<li><ANGLE OFFSET> determines the reference's position relative to the players.  As <ANGLE OFFSET> increases, the reference's position will move around the player in an anti-clockwise direction.  When <ANGLE OFFSET> is 0, the reference will appear directly in front of the player.</li>
	<li><PLAYER OFFSET> determine's the horizontal distance between the reference and the player.  As <PLAYER OFFSET> increases, the reference appears further and further from the player</li>
</ul>

The player can be substituted for any other reference here and the script will still work.  Note that the reference may appear to move through solid objects, especially when <PLAYER OFFSET> is set to a particularly large value.

==Autoclosing door==
Script Type: Object

<pre>
Scriptname AutoClosingDoor

float doorTimer
short closeDoor

Begin GameMode
	if closeDoor == 1
		if doorTimer > 0
			set doorTimer to doorTimer - getSecondsPassed
		elseif GetOpenState == 1 ; if the door is still open
			SetOpenState 0 ; close the door
			set closeDoor to 0
		endif
	endif
End

Begin OnActivate
	if GetOpenState == 3 ; if the door is closed
		if IsActionRef Player == 0  ; if it should work for the player remove this...
			set doorTimer to 5
			set closeDoor to 1
		endif                       ; ...and this
	endif
	Activate
End
</pre>

==Karma Effects on Items==
Script Type: Effect<br />
<small>For armour, you can use a scripted Object Effect.  This allows the armour to safely be equipped and unequipped via [[EquipItem]] and [[UnequipItem]]</small>

<pre>
ScriptName KarmaEffect

ref rWearer

Begin ScriptEffectStart
	set rWearer to GetSelf
	if rWearer.GetIsReference player
		RewardKarma -650
	endif
End

Begin ScriptEffectFinish
	if rWearer.GetIsReference player
		RewardKarma 650
	endif
End
</pre>

Script Type: Object<br />
<small>For weapons, you'll have to use an Object Script.  "Weapon" type Object Effects are applied to that weapon's target, and are therefore unsuitable for applying effects to the wielder</small>

<pre>ScriptName KarmaEffect

Begin OnEquip player
	player.RewardKarma -650
End

Begin OnUnequip player
	player.RewardKarma 650
End
</pre>

==Pusheffect==
Script Type: Effect

<small>spell effect script for a weapon that knocks people far away and creates a trail of smoke or fire along the way.<br />NOTE - Only works correctly when the player has the weapon equipped.</small>

<pre>
scn CALFPeffectSCR

short ActorValue1
short ActorValue2
short ActorValue3
short DamageValue

Begin ScriptEffectStart
    
    ; places initial explosion when hit, just in case there's no specified explosion effect in the weapons projectile
    ; also useful if you'd want a melee weapon or fist to cause explosions on hit
    placeatme {ExplosionType}
    
    Player.PushActorAway Target 104
    
    ; this is the part of the script in which you can specify a certain damage formula
    ; the formula can be added to the base damage amount set in the weapons tab
    ; -or you can set the damage in the tab to zero and fully rely on the formula to calculate damage
    ; it can be the target NPC/creature's actor value or the player's
    ; it's also fine not to make a certain damage formula
    set ActorValue1 to Player.GetAv {ActorValue1}
    set ActorValue2 to Player.GetAv {ActorValue2}
    set ActorValue3 to Player.GetAv {ActorValue3}
    
    set Damage to -1 * ( {formula incorporating actor values} )
    ModAv Health DamageValue
    
    ; make the effect play a certain sound-you could also use the sound of the explosion and not specify a specific sound
    Playsound3D Play a certain sound
End


Begin ScriptEffectUpdate
    ; this is the part where you place a smoke effect on every axis the NPC/Creature is located
    ; it makes as if the smoke is always coming out of the target while the effect is taking place
    placeatme {smokeeffect}
    
    ; alternatively add a smoke actor effect on the character
    CastImmediateOnSelf {smoke actor effect}
End


begin ScriptEffectFinish
    ;if you used the above alternative, this segment removes the smoke effect from the character
    RemoveSpell {smoke actor effect}
end

</pre>

= + [[Fallout Script Extender|FOSE]] =

== Terminals ==
Script Type: Object
;Script requires the [[Fallout Script Extender]].


<small>To be placed on a [[terminal]], it changes the usual "Robco" headers to your liking.</small>
<pre>
ScriptName TerminalChange

Short toggle
Float minitimer
Short activated

Begin OnActivate player
  set activated to 1
  Activate ;For people without FOSE, still works.
  con_setgamesetting sComputersHeader1 "GREAT ACADEMY OF VALHALLA"
  con_setgamesetting sComputersHeader2 "Republic of Valhalla"
  con_setgamesetting sHackingHeader "VALHALLA REPUBLIC TERMLINK PROTOCOL"
  con_setgamesetting shackingintro01 "WELCOME TO VALHALLA REPUBLIC TERMLINK"
  con_setgamesetting shackingintro06 "Initializing Valhalla Republic MF Boot Agent v2.1.9"
  con_setgamesetting shackingintro09 "Copyright 2156-2234 Academy of Valhalla"
End

Begin MenuMode
  if activated == 1
    set activated to 2
  endif
End

Begin GameMode
  if activated == 2
    set activated to 0
    ;On shutting down the terminal. Makes sure it doesn't show up on others.
    con_setgamesetting sComputersHeader1 "ROBCO INDUSTRIES UNIFIED OPERATING SYSTEM"
    con_setgamesetting sComputersHeader2 "COPYRIGHT 2075-2077 ROBCO INDUSTRIES "
    con_setgamesetting sHackingHeader "ROBCO INDUSTRIES (TM) TERMLINK PROTOCOL"
    con_setgamesetting shackingintro01 "WELCOME TO ROBCO INDUSTRIES (TM) TERMLINK"
    con_setgamesetting shackingintro06 "Initializing Robco Industries(TM) MF Boot Agent v2.3.0"
    con_setgamesetting shackingintro09 "Copyright 2201-2203 Robco Ind."
  endif
End

</pre>

== Hotkey ==
Script Type: Quest
;Script requires the [[Fallout Script Extender]].


<small>To be placed on a [[:Category: Quests|quest]], it will run some code when a key is released. See [http://fose.silverlock.org/fose_command_doc.html#DirectX_Scancodes FOSEs Command Docs] for additional DirectX Scancodes</small>
<pre>
ScriptName HotkeyReleased

Short sToggle

Begin GameMode
	if IsKeyPressed 25 != sToggle
		set sToggle to sToggle == 0
		if sToggle ;Button pressed
			;Do things when button 'p' is pressed, in this case, decrease karma
			RewardKarma -650
		else ;Button released
			;Do things when button 'p' is released, in this case, increase karma
			RewardKarma 650
		endif
	endif
End
</pre>